涂层标准

(R) Lubricant, Solid Film, Heat Cured,

Corrosion Inhibiting

Procurement Specification

MOS2/二硫化钼

1. SCOPE:

This SAE Aerospace Standard (AS) establishes the requirements for heat cured solid film

lubricants. For other general or high temperature applications, see AS1701.

1.1 Application:

For applications where temperatures may range from -90 to 400 °F (-68 to 204 °C).

1.2 Type:

This specification establishes the following types:

Type I: A lubricant capable of being cured within 60 minutes at 302 °F ± 27 °F (150 °C

± 15 °C) with an endurance life of 250 minutes minimum. See 6.4 for related

product information.

Type II: A lubricant capable of being cured within 60 minutes at 400 °F ± 27 °F (204 °C

± 15 °C) with an endurance life of 450 minutes minimum. See 6.4 for related

product information.

Type III: A low volatile organic compound (VOC) content lubricant capable of being

cured within 120 minutes at 302 °F ± 27 °F (150 °C ± 15 °C) or within

60 minutes at 400 °F ± 27 °F (204 °C ± 15 °C) with an endurance life of

450 minutes minimum. Type III shall be used when performance is satisfactory

for the desired application to meet VOC emission regulations.

Color 1 - Natural product color.

Color 2 - Black color. See 3.7.

See 6.4 for related product information.